Product ID:SCOTCHCAST BRAND ELECTRICAL RESIN 241
MSDS Date:01/01/1987
FSC:5970
NIIN:00-251-8772
Kit Part:Y
MSDS Number: BDNWW

3M CO

Emergency Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO ELECTRICAL HANDLING/PROTECTION

AUSTIN, TX 78769-1263 US

Telephone: 512-733-1341

Cage: 20999

LIQUID EPOXY RESIN CAS# N/R

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0-1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

INERT PIGMENT CAS# N/R

TALC(NON-ASBESTIFORM) CAS# 14807-96-6

RTECS: VV7720000

ACGIH TLV: 2 MG/CUM

Effects of Overexposure:EYE:IRRITATION.SKIN:IRRIT,SENSITIZATION IN
SUSCEPTIBLE INDIVIDUAL.INGEST:IRRITAT TO DIGEST SYST.SUPP

First Aid:EYE:IMMEDIATELY FLUSH W/ PLENTY OF WATER.CALL A
PHYSICIAN.SKIN:WASH W/ SOAP & WATER.INHAL:PROVIDE FRESH AIR.IF
COUGHING,WHEEZING OR SHORTNESS OF BREATH OCCUR,CALL A
PHYSICIAN.INGEST:GIVE ONE OR TWO GL ASSES OF WATER.CALL A
PHYSICIAN.

Flash Point:>340F,>171C CC
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:SHOULD BE EQUIPPED W/ SELF-CONTAINED BREATHING
APPARATUS
Unusual Fire/Explosion Hazard:NONE(PER MFR)

Spill Release Procedures:OBSERVE PRECAUTIONARY INFORM FROM OTHER
SECTIONS.USE ABSORBENT MATERIAL AS NEEDED & SWEEP UP.MIXTURE OF
PART A & PART B:OBSERVE PRECAUTIONARY INFORM FROM OTHER
SECTIONS.CLEAN UP SPILL.

Handling and Storage Precautions:HEAT CURING MUST BE CONDUCTED IN AN
OVEN THAT IS VENTILATED OUT OF THE WORK AREA.COOL DOWN SHOULD BE
VENT TO PREVENT VAP FROM ENTERING THE WORK AREA.
Other Precautions:DO NOT GET IN EYES,ON SKIN OR ON CLOTHING.AVOID
BREATHING VAPORS.USE ONLY IN WELL VENTILATED AREA.

Respiratory Protection:NIOSH/MSHA APPRVD ORG VAP RESPIRATOR WHERE
VENTILATION IS INSUFFICI.
Ventilation:EXHAUST VENTILATION FOR MIXING,POURING & CURING PROCESSES.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASS,GOGGLES.
Other Protective Equipment:N/R(PER MFR)
Supplemental Safety and Health
MSDS PREP:OCT 24,1985.INHAL:VAP MAY BE IRRIT TO NOSE,THROAT &
RESPIRATORY SYSTEM AT ROOM TEMP.VAP ARE IRRITATING WHEN PRODUCT IS
HEATED.THIS IS PART A OF A 2 2 PART KIT.KEY1:N1

HCC:N1
Spec Gravity:1.53
Viscosity:175 P
Solubility in Water:NIL
Appearance and Odor:BROWN VISCOUS LIQUID
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE(PER MFR)
Hazardous Decomposition Products:MAY INCLUDE CARBON MONOXIDE & CARBON
DIOXIDE

Waste Disposal Methods:DISPOSE BY INCINERATION OR SEND FULLY ADSORBED
MATERIAL FOR LANDFILL IN ACCORDANCE W/ LOCAL,FEDERAL & STATE
REG.MIXTURE OF PART A & PART B:FULLY CURED MATERIAL MAY BE
LANDFILLED IN ACCORDANCE W/ LOCAL ,FEDERAL & STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.